§ 79-32. Standards for equipment.

A. 

Service pipes and fittings, corporation cocks, curb cocks, curb boxes, meter settings and meter pit covers shall conform to such standards and shall be of such make and type as the Town Board shall adopt and shall be of such size as the Superintendent deems proper. Service pipes from the street main to the meter, less than two inches in diameter, shall be of pure, seamless, soft-tempered copper tubing with bronze fittings. Tubing shall be of the following thickness:

	Nominal Pipe Size (inches)	Outside Diameter of Tubing (inches)	Gauge (B.W.G.)
	3/4	7/8	16
	1	1 1/8	16
	1 1/3	1 3/8	16
	1 1/2	1 5/8	15

B. 

Meter and corporation cocks will be furnished by the District at prices to be fixed by the Superintendent, not exceeding 10% above cost.

C. 

A charge fixed by the Superintendent will be made for tapping the main and inserting the corporation cock.

D. 

Service pipes two inches in diameter and larger shall be universal cast-iron pipe, Type T, Class 150, connected to a tee in the main with a gate valve and box close to the main, except as otherwise approved by the Superintendent. The tee, valve and box and such other fittings as may be necessary for such connection shall be furnished by the District and shall be installed by the District or under the supervision or direction of the Superintendent, and the cost thereof, plus 10%, shall be paid by the applicant. Before the connection is made, the applicant shall deposit with the District such sum as the Superintendent shall deem sufficient for the aforementioned purposes. Upon the completion of the work, any balance which may remain in favor of the applicant shall be refunded upon claim duly made to the Town Board therefor.